Shop with Blessed Performance for the BDS Suspension 1-2" Leveling Kit for your 2017-2024 Ford F250/F350 4WD. Designed to improve stance, performance, and capability, this kit includes everything necessary to set your truck up right with clearance for up to 35" tires. Up front the lift kit includes dual rate Pro-Ride coil springs, track bar relocation bracket for steering correction, and alignment cams. This kit is rounded out with your choice of NX2 twin tube gas or FOX 2.0 Performance Series monotube IFP shocks to further dial in the comfort and control of your F250/F350.
Pro-Ride Coil Springs
A pair of full-length Pro-Ride coil springs are supplied to provide the correct lift height and smooth, predictable ride across various terrains. These dual rate springs utilize a softer initial spring rate over factory for improved on-road comfort, while also using a higher secondary spring rate to provide stability and performance in harsh terrains.
Highlights:
- Easy, 100% Bolt-on installation
- Pro-Ride dual rate coil springs ride smooth through any terrain
- Heavy duty track bar relocation bracket designed to recenter the front axle
- Standard NX2 Nitro shocks with vehicle-specific valving for better control
- Upgrade to FOX 2.0 Performance Series shocks for maximum performance on and off-road
Specs:
- Front Lift Method : Coil Spring
- Front Lift Height : 2
- Rear Lift Method : Stock
- Rear Lift Height : 0"
- Shocks Included : Yes
- Lift Height : 2-3.5"
Recommended Tires & Wheels
(Trimming may be required)
- 35 x 12.5 with 17 x 9 and 4.5 in. Backspace
- 35 x 12.5 with 18 x 9 and 4.5 in. Backspace
- 35 x 12.5 with 20 x 9 and 4.5 in. Backspace
Shock Option Specs:
NX2 Nitro Series
- Nitrogen-charged
- Twin-tube design
- 10-stage velocity-sensitive valving
- Dual-welded ends for increased strength
- 1-3/8-inch high-flow piston
- Self-lubricating seals
- Silver powder coat finish
FOX 2.0 Performance Series
- 2-inch Impact extruded aluminum body
- Internal floating piston (IFP) monotube design
- CNC machined 6061-T6 aluminum mounting ends
- Massive 5/8-inch hard chrome plated heat-treated alloy steel shaft
- Race-developed high-flow piston design
- Application-specific valving to maximize performance
- Long-lasting clear anodized finish
Fitment Note:
2017-2019 1" Lift
2020-2024 2" Lift
2017-2019 models net 1" of lift height; requires an additional 1" coil spring spacer to sit level.
2020-2023 models net 2".
Kit designed for diesel models; Gas models will achieve approx. 1/2" more ride height.
2024+ Ford Super Duty Only: This kit includes ball joint cams to achieve optimum performance both on and off-road. For vehicles equipped with non-selectable passenger side hub-lock on the front axle along with these ball joint cams, it is required to replace the non-selectable with a selectable hub-lock. Part number (PC3Z-3B396-A) is needed to prevent a grinding noise from the front axle for these applications. If your vehicle is not factory equipped with them, you may also need vacuum lines (3C125-A and/or 3C124). You can reference Section 307-07A of the Workshop Manual or Bulletin SSM 52423 for more information. See installation instructions for additional Information.
Fits SRW models ONLY
Vehicles with radius arm mounted ride height sensors will REQUIRE part number BDS123303.