Product Description
Shop with Blessed Performance for the BDS SUSPENSION 8" 4-Link Coil-Over Lift Kit (Diesel Only) for your 2020-2022 Ford F250/F350 Super Duty 4WD rig. BDS's tried and true 4-link conversion systems offer improved stability, strength and caster control during wheel travel.
The 4-link brackets are built from 1/4" steel and key off the factory frame bracket and transmission crossmember for extra strength. This systems take performance to the next level with FOX 2.5 factory series remote reservoir coilovers. The coilovers are pre-tuned for optimal performance and are include DSC adjustment. These bolt into place using the supplied mounting brackets and pair with a set of FOX 2.0 performance series gas shocks. A forged drop pitman arm and heavy duty track bar relocation bracket are supplied to correct steering angles and recenter the front axle. Also supplied for the front are bump stop extensions to control suspension compression, sway bar drop brackets to correct the sway bar positioning, and brake line relocation brackets.
BDS supplies a high strength transfer case indexing ring to rotate the front output of the transfer case down to correct the front driveline operating angle at the new lift height. The indexing ring uses ARP studs and includes new mounting hardware. Also supplied is a heavy duty replacement transmission crossmember to create additional clearance.
The rear is lifted with full replacement BDS Glideride leaf springs to provide the lift needed to level the stance. These springs are a 4-leaf design with integrated overload leaf for extra load capacity. They come fully assembled with bushings installed for ease installation and a smooth ride on and off-road. Finishing off the rear of this kit are a pair of matching NX2 or FOX 2.0 gas shocks to compliment the front setup for all around impressive performance. Allows for clearance of up to 40" tires with some trimming required. Take your Super Duty to the next level with BDS Suspension.
Tire & Wheel Combinations
- 40x13.50 w/20x9 and 4.5" back spacing
- 38x13.50 w/20x9 and 4.5" back spacing
*Trimming may be required*
- Est. Installation: 6-7 hours
- Difficulty Level (easy 1 - 5 complicated): 3
