Shop with Blessed Performance for the Bilstein 5100 Series Shock Absorber for your 1999-2016 Ford 7.3L/6.0L/6.4L/6.7L Powerstroke diesel. Bilstein shock absorbers as a direct-fit solution for your lifted truck. These shocks are made with a monotube design to give you exceptional on and off-road handling. Bilstein's 5100 Series Shock Absorbers are built with a velocity sensitive, digressive piston that reacts to changing road conditions.
Specs:
- Series: 5100 Series
- Drive Type: 4WD
- Position: Front
- Descriptor: Front Lifted Height: 0-2"
- Quantity Needed Per Vehicle: 2
- Finish: Zinc Plated
- Reservoir: No
- Body Design: 46mm ID Smooth Body (Non-Coilover)
Measurements:
Collapsed Length (IN): 13.27
Extended Length (IN): 21.52
Collapsed Length (MM): 337.00
Extended Length (MM): 546.50
Vehicle Fitment:
1999-2016 Ford F-250/350 2WD Front (Lifted 6") With Factory Radius Arms
1994-1997 Ford F-250 2WD Front (Lifted 6") With Front Coil Springs
1994-1995 Ford F-350 2WD Rear (Lifted 6") With Front Coil Springs
Note:
Lift height is suggested by mfg. Due to the many different aftermarket suspension systems it is recommended that a measurement is taken for proper application. A pin to eye shock is measured from the base of the stem where the mounting hardware rests to the center of the eyelet.