Product Description
Shop with Blessed Performance for the Choate 6.7L Daily Driver Full Running Assembly for your 2011-2019 Ford 6.7L Powerstroke diesel.
Before purchasing please verify the year model engine is compatible with your truck.
2011-2012
6.7 Powerstroke Come stock from Ford with a 6-bolt flexplate and torque converter that are no longer manufactured. All 6.7 Powerstroke balanced assemblies from Choate Engineering come with the updated 8-bolt flexplate from 2013+ and require the customer to update the torque converter or purchase one from us directly.
2017+
6.7 Powerstroke have a larger “Hole Diameter” for the motor mounts and bolts.
- Cylinder Block
- Bore block back to crankshaft center line
- Hone block to 12Rk finish
- Crank Shaft
- Check crankshaft main and rod clearances
- Magnuflux crankshaft
- Balance rotational assembly
- Replace Main bearings
- Replace rod bearings
- Replace cam bearings
- Replace Main bolts
- Connecting Rods
- Inspect and condition rods
- Camshaft
- Inspect and polish camshaft
- Crankshaft
- Polish crankshaft
- Pistons
- Install Pistons
- Pistons, rings, Pin retainers weight matched prior to crank balancing (*optional ceramic and DFL coating available)
- Reman Heads
- Resurface heads
- Magnuflux and pressure test heads
- Cut new valve seats
- Cut valves
- Install new valve guides
- Install new valve seals
- Test spring tension
- Install New Head Gaskets
- Install Studs
- Install New Bed Seals
- Install Rear Main Seals
- Install New Lifters
- Rear Cover Gasket
- Rear Main Seal
- Rear Cover Installed
- New OE Harmonic Balancer
- New Flywheel
- Items Included:
- 2 Water pumps
- 4 Thermostats
- Fuel Rail Pressure Sensor
- Front cover and gaskets
- Turbocharger Turbo
- Pickup tube
- Map Sensor
- Coolant Temp Sensor
- Intake Air Temp Sensor
- Exhaust Back Pressure Sensor
- Engine Oil Pressure Switch
- Crank Position Sensor
- Camshaft Position Sensor
- Oil Cooler
- Fuel Filter