Product Description
Shop with Blessed Performance for the Choate Workhorse Long Block for your 2003-2007 Ford 6.0 L Powerstroke diesel.
Workhorse upgrades include:
- Coated, Flycut, and Delipped Pistons
- O-ring heads
- Chromoly Pushrods
- Stage 2 Camshaft
- Choate Engineering Billet Flex plate
– BUILT-IN-HOUSE Heads – Magnuflux and Pressure Test Heads, Grind Valves, New Induction Hardened Seats, All New Valve Guides, Install New Valve Seals, Test Spring Tension, New Freeze Plugs, New Injector Cups.
– Head Studs included in the Daily Driver build, New Head Gaskets
– Full CNC blue print machining, (bore, deck, hone and line honed) – The Cylinder bores are blue print bored to a true 90 degrees from the crankshaft center line, prior to being diamond honed to within .0002″ for precise piston to cylinder bore clearances. They main bore and line hone the crankshaft which is honed to precisely align the crankshaft in the engine block. They bore the block back to the crankshaft center line and hone the block to Ra 13 finish. The piston diameter measured to the nearest .0001″ matched to cylinder bores. The Cylinder block is surfaced to a finish of 30 Ra or lower, which meets the factory specification in both flatness and smoothness for the block to head sealing surface. This is mandatory for proper sealing of a MLS Gasket.
– Connecting Rods, New Damper and Flex plate for Automatic transmission. All Manual will be charged the appropriate charges and will be balanced to a stock flywheel we have in stock or you will need to send in your Aftermarket in first. – Check both wrist pin and crank pin to rod clearances
– New Upgraded Pistons .10 – .30″ over – NEW Pistons, Rings, Pin Retainers weight matched prior to crank balancing
– New OE Lifters, Lifter Guides, OE Crank Flange Bolts, Updated 9.800 OE Pushrods
– Crankshaft – Balanced with the Rotational assembly checked for run-out inspected for fatigue. Crankshaft is Polished and ground to .0005 concentricity or less
– Camshaft – Polished and Inspected
-New Rod, Main and Cam Bearings
-Install Rear Main Seal
-Install New Bed Seals
-Install New Rear Cover Gasket
-Install Upper and Lower Oil Pan Gaskets
-Install Pickup Tube O-ring
-Rear Cover Installed
- Assembled by OUR Professional Team in house
- Perfect for daily driving us, family haulers, heavy Towing or your performance build
- 5 year 100K warranty on our Daily Driver builds with upgrade-able options
INSPECTION OF CORE TAKES APPROXIMATELY 2 WEEKS. ONCE INSPECTED APPROPRIATE CORE FEES WILL BE KEPT AND BALANCE REMAINING WILL BE REFUNDED PROMPTLY IN THE FORM OF A CHECK.
CHOATE REQUIRE A LIKE FOR LIKE CORE- MEANING IF SENT A LONG BLOCK ITS REQUIRED EVERYTHING FROM YOUR CORE LONG BLOCK TO BE USABLE AND MACHINABLE.
NEED THE YEAR, MAKE, MODEL AND VIN NUMBER TO MAKE SURE YOU ARE BUYING THE CORRECT ENGINE BEFORE SHIPPING. MUST KNOW IF THE TRANSMISSION IS MANUAL OR AUTOMATIC AS THIS EFFECTS PRICES AND USABILITY. *If transmission is manual, we suggest purchasing a flywheel so we can balance it to a new flywheel. If customers flywheel is used the engine will be balanced to a stock flywheel.*
FRONT COVER, OIL COOLER, OIL PUMP ARE NOT INCLUDED IN OUR LONG BLOCK BUILD. They install the following gaskets and parts new: bed seals, rear main seals, new rear cover gasket, upper and lower oil pan gaskets, pickup tube O-rings, rocker carrier gaskets, and rear cover. Valve covers are placed for shipping purposes ONLY. THE VALVE COVER GASKET IS NOT INCLUDED.
