Gauges & Kits

Banks Power Air Temperature Kit

Shop with Blessed Performance for the Banks Power Air Temperature Kit for use with your Banks iDash 1.8 Datamonster & Super Gauge. The temperature sensor includes a plug and play adapter for Banks 4-Ch Analog Module and works with pre-defined...

Banks Power B Bus 24" iDash 1.8 Extension Cable

Shop with Blessed Performance for the Banks Power B-Bus 24" iDash 1.8 Extension Cable for use with Banks iDash 1.8 Datamonster & Super Gauge. The Extension Cable provides you with 2’ worth of quality cable that allows you to easily install your...

Banks Power B-Bus 48" iDash 1.8 Extension Cable

Shop with Blessed Performance for the Banks Power B-Bus 48" iDash 1.8 Extension Cable for use with Banks iDash 1.8 Datamonster & Super Gauge. The 4 foot wire is constructed to fit the quality Banks has become known for and helps you install your...

Banks Power Banksbus Starter Kit

Shop with Blessed Performance for the Banks Power Banksbus Starter Kit for use with Banks iDash 1.8 Datamonster & Super Gauge. Connects your Dash 1.8(s) to a BanksBus module such as the 4-ch sensor modules or Derringer. Only one connection kit is...

Banks Power Channel Analog Module System

Shop with Blessed Performance for the Banks Power 4-Channel Analog Module System for use with Banks iDash 1.8 Datamonster & Super Gauge. Easily installed the Analog Module System works with a wide variety of Banks plug and play sensors as well...

Banks Power Fluid Temperature Kit

Shop with Blessed Performance for the Banks Power Fluid Temperature Kit for use with Banks iDash 1.8 Datamonster & Super Gauge. The Temperature Sensor includes a plug and play adapter for Banks 4 -Ch Analog Module...

Banks Power iDash 1.8 Datamonster Gauge Expansion Kit

Shop with Blessed Performance for the Banks Power iDash1.8 Datamonster Gauge Expansion Kit. In addition to monitoring 300 parameters, the iDash 1.8 DataMonster Gauge Expansion Kit can track 100 parameters. The Expansion Kit allows you to install...

Banks Power iDash 1.8 Datamonster Pre 1996 Non-OBII Applications

Shop with Blessed Performance for the Banks Power iDash 1.8 Datamonster for Pre 1996 NON-OBII Applications. This monitor is customizable and can display up to 8 different parameters such as vehicle speed, EGTs, Boost, AFR, RPM, and engine...

Banks Power iDASH 1.8 Expansion Gauge

Shop with Blessed Performance for the Banks Power iDash 1.8 Expansion Gauge for your Powerstroke, Cummins or Duramax diesel. The iDash can display up to eight advanced parameters on a single screen in real time. This secondary add-on gauge...

Banks Power iDash 1.8 Terminator Cable

Shop with Blessed Performance for the Banks Power iDash 1.8 Terminator Cable for use with Banks iDash 1.8 Datamonster & Super Gauge. Add a 120 ohm CAN termination resistor to the iDash 1.8 for aftermarket ECU communication. (4 pin male-female...

Banks Power Type K Thermocouple

Shop with Blessed Performance for the Banks Power Type K Thermocouple for use with Banks iDash1.8 Datamonster & Super Gauge. The Type K Thermocouple features a simple plug and play installation. Designed to work with your iDash, the Type K...

BD-POWER AMBER ALARM LED KIT 1999-2003 7.3L FORD POWERSTROKE

The BD-Power 1081123 Amber Alarm LED Kit provides you with an LED and 6' lead to hook up to any source that you need to monitor. This kit is intended for those making their own warning lights that are hooked up to a pressure switch, or any other...

BD-POWER RED ALARM LED KIT 1999-2003 7.3L FORD POWERSTROKE

The BD-Power 1081121 Red Alarm LED Kit provides you with an LED and 6' lead to hook up to any source that you need to monitor. This kit is intended for those making their own warning lights that are hooked up to a pressure switch, or any other type...

BULLY DOG DIGITAL MORPHING CONTROLLER 1999-2003 7.3L FORD POWERSTROKE -DESIGNED FOR USE WITH BULLY DOG GAUGES

The digital morphing controller allows you to adjust the color and brightness of up to 4 gauges with the touch of a button. Choose from brilliant blue to an amazing green or 5 shade variances in-between. More than 4 meters on board? No problem, just add...

BULLY DOG PYROMETER PROBE 1999-2003 7.3L FORD POWERSTROKE

The Bully Dog 40387 Pyrometer Probe is a standard K-Type Thermocouple for use with the Bully Dog Sensor Docking Station. This analog sensor will measure exhaust gas temperatures when paired with the docking station and either the standard or heavy duty...