Shop with Blessed Performance for the Grizzly Performance 48V FICM for your 2003-2007 Ford 6.0L Powerstroke diesel.
PHP PERFORMANCE UPGRADES:
- Resolves many cold-start issues
- Usually resutls in more MPG
- Improves tip-in throttle response
- Results in better overall drivability from idle up through 3500 rpm
- Proven performance gains up to 100 HP
- Eliminates annoying injector post buzz
- Works with most ECM tuning
ECONOMY – Improved throttle response and economy without any significant power gains. Good for all applications, but generally used when the ECM has a high horsepower tune and additional fueling is not desired.
ATLAS 40 – Improved throttle response and economy with a 40 HP gain. Useful for mild to heavy towing or when excessive exhaust gas temps (EGTs) are a concern. Good for trucks without head studs.
ATLAS 80 – Improved throttle response and economy with an 80 HP gain. Best for daily driving or very light towing.
HERCULES – Maximum performance with a 100+ HP gain. Not recommended for towing as it can increase EGTs. It’s recommended you run an EGT probe to monitor temps. NOT RECOMMENDED FOR TRUCKS WITHOUT HEAD STUDS.
Core Return Options-You have 3 options for core return: Express, Core Swap or No Core.
1. Express: We will immediately send you a Grizzly FICM and YOU AGREE TO SEND US YOUR CORE WITHIN 30 DAYS. We will TEMPORATILY CHARGE YOUR CARD $250 for a core charge and will refund the $250 core charge if we receive the core within 30 days. *IT IS YOUR RESPONSIBILTY TO SEND US YOUR CORE*
Express Core Return Terms:
- If wereceive the core within 30 days, we will issue a full refund of $250.00
- If we receive the core between 31-59 days, the refund will be reduced to $200.00
- Afer 60 days, NO CORE REFUND WILL BE ISSUED.
2. Core Swap: There is NO CORE CHARGE involved with this option. We MUST RECEIVE your core BEFORE we ship your FICM. We will send you a Grizzly FICM once we have received your FICM core or a tracking number.
3. No Core: You DO NOT send us a core and AGREE TO PAY A CORE CHARGE OF $250.00
Note:
*PLEASE ship your FICM core CAREFULLY. Use proper packing material, ect. If the core IS NOT PACKAGED CAREFULLY AND THE CONNECTOR IS BROKER, WE WILL DEDUCT $75.00 FROM YOUR CORE RETURN.
*If you choose EXPRESS as a Core Return Option, we will send you a Core Return Form when we send your new FICM. Please INCLUDE the Core Return Form when you send in your core. We recommend that you use the same box and packing material.
HOW TO CHECK VOLTAGE OUTPUT ON A 48V/58V FICM
To check the actual output voltage on a Grizzly 58V FICM, you must use a voltmeter. We implement a modification process that tells the PCM that 58 volts is actually 48 volts because the PCM would otherwise report an error code at 53 volts. In other words, with our modification the PCM sees 48 volts, the injectors see 58 volts. And since the scan tool communicates with the PCM to check voltage, you will only see 48 volts with a scan tool.
Remove the access cover on the back by removing the two T-20 screws
Carefully remove the access cover by gently prying the cover off of the module.
With access cover opening oriented to the left side, place the black lead on the top screw and the red lead on the bottom screw. Be very careful not to short the red lead to the module case. This could damage the FICM.
