Product Description
Shop with Blessed Performance for the Icon Dynamics 4" Suspension System for your 2000-2004 Ford F250/F350 4WD. This 4" system is designed to lift your Ford Super Duty. 4" front leaf springs provide room for 35" tires. This system uses a custom progressive pack for ultimate ride quality, while providing 4" of lift. This system comes with a 1.75" bump stop spacer (not pictured) to prevent spring fatigue during the suspension cycle. Also included in this kit is 4" rear block kit, with 15" U-bolts for a leveled stance. This system is the ideal for all Super Duties.
Highlights:
- Increased Wheel Travel
- Durable Powder Coat Finish
- Less Body-Roll Than Stock Truck
- Isolates Stock Springs For Factory Like Ride Quality
- No Change In Towing Capacity
- No Drive Shaft Modifications Needed
- 100% Bolt-On System - No Drilling, Cutting, Or Welding Necessary For Installation
Note:
OEM Wheels & Tires Fitment: Yes
Recommended Aftermarket Wheels: Icon Alloys | 17x8.5" W/ 5.00" Backspace / 6mm Offset
Recommended Aftermarket Wheels: Icon Alloys | 18x9" W/ 5.25" Backspace / 6mm Offset
Recommended Aftermarket Wheels: Icon Alloys | 20x9" W/ 5.25" Backspace / 6mm Offset
Recommended Aftermarket Tires: 35:" X 12.50" (Larger Tires May Fit But Fender Trimming And Modifications Will Be Required.)
Recommended Aftermarket Wheels: Icon Alloys | 17x8.5" W/ 5.00" Backspace / 6mm Offset
Recommended Aftermarket Wheels: Icon Alloys | 18x9" W/ 5.25" Backspace / 6mm Offset
Recommended Aftermarket Wheels: Icon Alloys | 20x9" W/ 5.25" Backspace / 6mm Offset
Recommended Aftermarket Tires: 35:" X 12.50" (Larger Tires May Fit But Fender Trimming And Modifications Will Be Required.)
Front U-Bolt Note: All Front Springs Come Complete With Front U-Bolts, Washers, And Nuts. When Ordering Any Front Spring System From Icon Vehicle Dynamics Please Specify Manufacture Year.
No Front Driveshaft Modification Needed. Stock Driveshaft Is Fully Functional.
Springs Are Rated For Diesel Engines Only.
This System May Require A Carrier Bearing Drop Bracket Kit (33700).
These Are Stand-Alone Kits And Are Not To Be Used In Conjunction With Any Other Aftermarket Kits.
No Front Driveshaft Modification Needed. Stock Driveshaft Is Fully Functional.
Springs Are Rated For Diesel Engines Only.
This System May Require A Carrier Bearing Drop Bracket Kit (33700).
These Are Stand-Alone Kits And Are Not To Be Used In Conjunction With Any Other Aftermarket Kits.
