Product Description
Shop with Blessed Performance for the Industrial Injection Performance LML Duramax Injector for your 2011-2016 GM 6.6L LML Duramax diesel. From the mild Dragon Fly 19LPM (15% over) injector to the high flow R6 34LPM (100% over) injector, Industrial Injection has an injector to match the modifications done to your truck. This genuine OEM remanufactured injector is extrude honed and flow balance by Industrial Injection to ensure even power output from all cylinders. Included with the injector are new O-rings & a new copper crush washer for installation and a 1-Year Unlimited mileage warranty. Sold Individually
Highlights:
- Sold Individually
- Flow Rate Balanced
- Direct-Fit Replacement
- 1-Year / Unlimited Mileage Warranty
POWER LEVELS:
Dragon Fly
The Dragon Fly 15% over injector will work great in a stock truck as well as one that has mild tuning and or turbo upgrades. Gains of 1-3MPG in fuel economy are common.
Race 1 (20LPM 20%)
The Race 1 20% over injector is designed for stock truck as well as one that has been modified with hotter tuning and mild turbo upgrades. Gains of 1-3MPG in fuel economy are common.
Race 2 (22LPM 30%)
The Race 2 30% over injector should be ran with an 85% over injection pump and bigger turbo like a Phatshaft turbo to lower EGTs and increase performance. Gains of 1-3MPG in fuel economy are common.
Race 3 (24LPM 40%)
The Race 3 40% over injectors should be ran with an 85% over injection pump or a dual CP3 kit and a turbo like a Phatshaft turbo or a compound turbo set up to reduce EGTs and improve performance. Gains of 1-3MPG in fuel economy are common.
Race 4 (26LPM 50%)
The Race 4 50% over injectors should be ran with a 120% over injection pump or a dual CP3 kit and a turbo like the Silver Series Phatshaft turbos, Single S400 or a compound turbo setup. This will greatly increase power while keeping EGTs manageable. Gains of 1-3MPG in fuel economy are common.
Race 5 (30LPM 75%)
The Race 5 75% over injectors should be ran with a 120% over injection pump or a dual CP3 kit and an S400 turbo or compound turbos. This will keep the EGTs in check and greatly increase horsepower. Gains of 1-3MPG in fuel economy are common.
Race 6 (34LPM 100%)
The Race 6 100% over injectors should be ran with a dual CP3 kit with modified pumps and an S400 turbo or compound turbos to run more efficiently and to help minimize EGTs.
Notes:
Fuel Lines must be replaced or sent in for cleaning to retain warranty.
When replacing the injectors in your Duramax, Industrial Injection highly recommend replacing the injector fuel lines to avoid new injector contamination as the most common failure of a new injector is contamination from the fuel lines.
This product CAN NOT be sold in or shipped to the state of California.
