Product Description
Shop with Blessed Performance for Randy's Transmission BABYMAKER 2000 KIT for your 2019-2024 Dodge 6.7L Cummins
Highlights:
FOR 2019 AND UP 68RFE TRANSMISSIONS
The valve body is flat sanded to our tolerances. We install HD billet accumulators proven to prevent bore wear and
provides unsurpassed sealing qualities. Sonnax accumulator plate cover with 3 additional bolts
eliminating plate blowout. SSV is reamed out and Transgo switch valves are installed to correct wear and leaks. All valve body bores are vacuum tested to insure hydraulic integrity. HD billet channel plate is installed onto the valve body and torqued to our specifications preventing cross leaks which results in premature transmission failure.
Includes new O.E solenoid block.
Comes With:
Valve Body, Deep Pan, Gasket, Filters, And Billet Filter Adaptor.
THIS WILL NOT FIX A TRANSMISSION WITH RATIO CODES. IF YOU'RE EXPERIENCING THIS ISSUE, THE TRANSMISSION IS HURT.
THIS IS THE INFORMATION YOUR TUNER WILL NEED TO PROPERLY TUNE FOR THE BABYMAKER:
LINE PRESSURE SET TO 225PSI ABOVE 30% THROTTLE ANGLE
100PSI RESTING PRESSURE
NO LOCKUP UNTIL 4TH GEAR
LOW/REVERSE SPRAG HOLDOUT
UNDERDRIVE PULSE TEST MUST BE TURNED OFF.
