Product Description
Use the BD-Power Iron Horn Turbo Kit in your 2007.5-2018 Dodge 6.7L Cummins when you want a dependable, non-VGT option. Designed for the ultimate in power, response, and reliability, the Iron Horn Series Turbo Kits replace the problematic factory turbocharger in your truck with a genuine BorgWarner S300 SX-E Turbocharger. Utilizing a high-flow T4 turbine housing, the SX-E was built for performance with a 360-degree thrust bearing, and an enhanced compressor wheel and housing. The high-strength FMW Forged Milled Wheels are lighter and stronger and withstand higher wheel speeds.
Each kit comes ready to install with BD's Performance Plus T4 6.7L exhaust manifold and gaskets. Designed for a drop-in installation, this turbo kit requires no additional piping and simply drops in place for an easy, clean installation. Required tuning not included.
Turbo Size Details:
S363SXE/76/.91
- A/R Ratio: 0.91
- Flow: 79 Lb/min
- Comp Wheel: 63mm (2.48in)
- Turbine Wheel: 76mm (2.99in)
- Rated For Approximately 550HP
S363SXE/80/.91
- A/R Ratio: 0.91
- Flow: 79 Lb/min
- Comp Wheel: 63mm (2.48in)
- Turbine Wheel: 80mm (3.15in)
- Rated For Approximately 550HP
S364SXE/80/.91
- A/R Ratio: 0.91
- Flow: 82 Lb/min
- Comp Wheel: 64.5mm (2.48in)
- Turbine Wheel: 80mm (3.15in)
- Rated For Approximately 600HP
S364SXE/80/1.0
- A/R Ratio: 1.0
- Flow: 82 Lb/min
- Comp Wheel: 64.5mm (2.48in)
- Turbine Wheel: 80mm (3.15in)
- Rated For Approximately 600HP
S366SXE/80/.91
- A/R Ratio: 0.91
- Flow: 87 Lb/min
- Comp Wheel: 66mm (2.60in)
- Turbine Wheel: 80mm (3.15in)
- Rated For Approximately 650HP
S366SXE/80/1.0
- A/R Ratio: 0.91
- Flow: 87 Lb/min
- Comp Wheel: 66mm (2.60in)
- Turbine Wheel: 80mm (3.15in)
- Rated For Approximately 650HP
S369SXE/80/.91
- A/R Ratio: 0.91
- Flow: 98 Lb/min
- Comp Wheel: 69mm (2.72in)
- Turbine Wheel: 80mm (3.15in)
- Rated For Approximately 700HP
S369SXE/80/1.0
- A/R Ratio: 0.91
- Flow: 98 Lb/min
- Comp Wheel: 69mm (2.72in)
- Turbine Wheel: 80mm (3.15in)
- Rated For Approximately 700HP
Application Notes:
For 2500/3500 pickups only. Call us for details on cab & chassis install 1-800-577-2698.
Air intake kits other than K&N and the OEM intake system may require modification for installation.
Tuner or programmer required for non-VGT turbocharger.