BD-Power Flow-Max Fuel Heater Kit- FOR USE on ALL AirDog Fuel Systems

Shop with Blessed Performance for the BD-Power Fuel Heater a must have for those in cold climates. Prevent cold weather gelling of your AirDog fuel system with the BD-Power PTC Heating Element. Designed for quick installation, this heating...

FASS Electric Heater Kit - FOR USE WITH FASS TITANIUM SERIES FUEL PUMPS

Shop with Blessed Performance for the FASS Electric Heater Kit an optional heater intended as an upgrade for FASS systems being used in cold regions. Each FASS Titanium Series pump has ports for two electric heaters, that will aid in cold...

FASS HKS-1001 Dual Electric Heater Kit Splitter

 The FASS HKS-1001 Dual Electric Heater Kit Splitter eliminates the need to re-wire or solder the connections when installing dual electric heaters on your FASS Fuel System.    Features: Plug & Play Installation For...

FASS Replacement Heater Element

The FASS 32283 Replacement Heater Element is a direct plug and play replacement heater element for the FASS HK-1001 Electric Heater Kit.  Features: For FASS Fuel Systems  Replacement Heater Element  Application...

FASS TITANIUM SIGNATURE SERIES 100GPH FUEL SYSTEM 2001-2010 GM 6.6L DURAMAX (STOCK TO MODERATE)

The FASS TS C10 100G Titanium Signature Series 100GPH Fuel System with Whisper Technology is engineered to be the top performing, longest lasting and most reliable aftermarket filtration system on the market for your 2001-2010 GM 6.6L Duramax. Rated...

FASS TS C10 165G TITANIUM SIGNATURE SERIES 165GPH FUEL SYSTEM 2001-2010

The FASS TS C10 165G Titanium Signature Series 165GPH Fuel System with Whisper Technology is engineered to be the top performing, longest lasting and most reliable aftermarket filtration system on the market for your 2001-2010 GM 6.6L Duramax. Rated...

FLEECE MODIFIED CP3 PUMP 2001-2010 GM 6.6L DURAMAX (650HP)

Blessed Performance has the Fleece Performance modified Duramax LBZ CP3 designed to eliminate the factory fuel flow restriction that begins at 3,000 RPM. If you have a stock CP3 pump you are losing fuel flow and rail pressure after 3000 RPM,...

FLEECE 1/2" CP3 FEED FITTING UNIVERSAL - 1/2" FEED

DESCRIPTION The Fleece FPE-CP3-FEED 1/2" CP3 Feed Fitting is built from high quality stainless steel. This fitting features a larger inlet that provides increased fuel capacity to the CP3.   FEATURES: 1/2" Barbed Inlet...

FLEECE INJECTOR LINE SET 2001-2004 GM 6.6L DURAMAX LB7

DESCRIPTION Use the Fleece FPE-34611 Injector Line Set when you need to replace an injector line or replace the injectors in your 2001-2004 GM 6.6L Duramax LB7. Re-using the old injector lines is a main cause of fuel contamination in...

FLEECE POWERFLOW 750 10MM STROKER CP3 PUMP 2001-2010 GM 6.6L DURAMAX (750HP)

Blessed Performance has the Fleece Performance PowerFlow 750 a straight forward, no inflated numbers, CP3 upgrade proven to support 750 RWHP with the proper complimenting modifications. Not only will it support 750 RWHP, but it also eliminates...

Vibrant 16318 -8AN Push-On Flex Hose

The Vibrant 16318 -8AN Push-On Flex House allows to plumb your custom fuel system. The black nitrile rubber hose has an operating pressure of 250PSI and features a .50 ID with a temperature use range of -30 degrees F to 160 Degrees F. 10 foot rolll. ...