DORMAN ENGINE OIL COOLER 2001-2016 GM 6.6L DURAMAX

Replace the failing oil cooler in your 2001-2016 GM 6.6L Duramax with the Dorman 918-400 Engine Oil Cooler. When your oil cooler is not functioning properly, it can cause oil leaks, and higher than normal operating temperatures. Dorman's Engine Oil...

ALLIANT BELT TENSIONER 2002-2016 GM 6.6L DURAMAX

The Alliant Belt Tensioner AP63449 is a direct replacement for your 2002-2016 GM 6.6L Duramax. Alliant Power provides OEM quality, without the OEM price. Keeping Original Equipment Manufacturer (OEM) product as the preferred service part so vehicles and...

FLEECE FPE-DMAX-OCADPT DURAMAX OIL COOLER ADAPTER 2001-2007 GM 6.6L DURAMAX | 2011-2016 GM 6.6L DURAMAX

The Fleece FPE-DMAX-OCADPT Duramax Oil Cooler Adapter is engineered to stop the oil coolant adaptor from leaking in your 2001-2007 GM 6.6L Duramax or 2011-2016 GM 6.6L Duramax. The factory oil cooler adapter relies on a metal gasket for the oil cooler...

PPE MAIN STUD KIT 2006-2016 GM 6.6L DURAMAX

Give the bottom end of your 2006-2016 GM 6.6L Duramax more rigidity when you install the PPE 118034100 Main Stud Kit. This main stud kit will allow your engine to support greater boost and horsepower by adding strength to the main caps. The studs in this...

ARP DIESEL MAIN STUD KIT 2006-2010 GM 6.6L DURAMAX LBZ/LMM

When you are setting up a Duramax engine for drag racing and sled pulling, ARP main and head studs are a must have item! Keep your mains from walking and fretting by clamping down on them with a ARP Stud set that will insure your...

ARP BLACK OXIDE VALVE COVER BOLT KIT 2004.5-2016 GM 6.6L DURAMAX LLY/LBZ/LMM/LML

ARP Valve Cover Bolt Kits are rated at 170,000 PSI tensile strength which is substantially stronger than grade 8 hardware. Offered for all Duramax engines these kits are offered in Hex or 12-Point Heads. FEATURES: 170,000 PSI Tensile Strength Black...

DTECH GLOW PLUG 2006-2010 GM 6.6L DURAMAX LBZ/LMM

Restore operation and trouble-free starting to your 2006-2010 GM 6.6L Duramax with the DTech DT660012 Glow Plug. DTech Glow Plugs are precisely engineered to meet or exceed factory specifications.   FEATURES: Sold...

MERCHANT AUTOMOTIVE GLOW PLUG DELETE KIT 2006-2016 GM 6.6L DURAMAX

The Merchant Automotive 10091 Glow Plug Delete Kit includes glow plug replacements for your performance built 2006-2016 GM 6.6L Duramax. The Glow Plug Delete is intended for use on purpose built race engines. Operating without glow plugs will cause...

GM GLOW PLUG 2006-2016 GM 6.6L DURAMAX

The GM 12639701 Glow Plug is a direct replacement for your 2006-2016 GM 6.6L Duramax LBZ, LMM & LML. Replacing failed glow plugs can eliminate check engine lights and hard starting. This OE replacement is built to the same high quality standards...

MERCHANT AUTOMOTIVE INTAKE TUBE SEAL KIT 2006-2010 GM 6.6L DURAMAX LBZ/LMM

Replace the worn out, leaking or torn Y-bridge O-rings in your 2007-2010 GM 6.6L Duramax with the Merchant Automotive 10017 Intake Tube Seal Kit. This O-ring kit is a direct fit replacement are designed to stop leaks at the base of the Y-bridge and comes...

MAHLE INTAKE MANIFOLD GASKET SET 2006-2007 GM 6.6L DURAMAX LLY/LBZ

Get a dependable OE quality gasket when you purchase the MAHLE MIS19403 Intake Manifold Gasket Set for your 2006-2007 GM 6.6L Duramax LLY/LBZ. The Intake Manifold Gasket Set maintains a factory performance and is constructed to meet stock...

DTECH NOISE ISOLATOR GROMMETS 2004.5-2010 GM 6.6L DURAMAX

The DTech DT660017 Noise Isolator Grommet Set is a direct replacement for your 2004.5-2010 GM 6.6L Duramax. As your Duramax ages, replacement of gaskets and seals like this are recommended for a leak-free repair. OE style quality, built to meet or...

MAHLE AIR INTAKE HEATER GASKET 2006-2010 GM 6.6L DURAMAX LBZ/LMM

The MAHLE G31907 Air Intake Heater Gasket is a high-quality, direct-fit replacement for the leaky gasket in your 2006-2010 GM 6.6L Duramax LBZ/LMM. This intake heater gasket is designed to meet or exceed the factory specifications of your stock gasket to...

MAHLE F31910 EGR VALVE GASKET 2006-2010 GM 6.6L DURAMAX LBZ/LMM

The MAHLE F31910 EGR Valve Gasket is a direct-fit replacement for the damaged EGR gasket in your 2006-2010 GM 6.6L Duramax LBZ/LMM. This EGR gasket is constructed from multi-layered steel for strength and longevity and is designed to meet or exceed...

MAHLE EGR VALVE GASKET 2006-2010 GM 6.6L DURAMAX LBZ/LMM

The MAHLE F31912 EGR Valve Gasket is a high-quality replacement for the leaking EGR gasket in your 2006-2010 GM 6.6L Duramax LBZ/LMM. This steel EGR gasket is engineered to meet or exceed the factory specifications for durability and quality...