Pacbrake Performance Override "Valet" Switch Kit

Override the power of your vehicle with the flick of a switch! By preventing full fuel flow to the injectors, this kit has the ability to cut your engine's horsepower by approximately 1/2. This switch was designed for situations when you don't want the...

Pacbrake 2-Wheel Low Kit

This kit is specially designed for maneuvering your truck (and trailer) in tight, uphill conditions. The 4WD 2 Wheel Low switch allows the operator to engage the transfer case into 4WD low range without engaging the front wheel drive. Hit the dash...

BD-Power 2Low Unloc

The BD-Power 1030703 2Low Unloc for your 1994-2002 Dodge 5.9L Cummins is designed to provide you with the option of low range in 2WD! This kit is designed to allow the operator to manually disable the front wheel drive mechanism by holding the hubs in...

BD-Power Dodge APPS Noise Isolator

Eliminate the interference in the throttle position sensor in your 1994-2004 Dodge 5.9L Cummins with the BD-Power 1300030 Dodge APPS Noise Isolator. The interference that is common on these trucks creates false voltage readings in the Accelerator Pedal...

Flex-a-lite 31143 Illuminated 3-Way Switch

The Flex-a-lite 31143 Illuminated 3-Way Switch gives you the option to override the fan controller and adapt to the demands of your ride. One illuminated switch provides cockpit control for turning the fans on at 100-percent for tow mode, turning the...

Diesel Turbo Lifesaver CM1E Control Module

Protect your turbocharger and allow for proper cool-down with the Diesel Turbo Lifesaver CM1E Control Module. The Diesel Turbo Lifesaver is designed to automatically idle your engine and turn it off without needing the ignition key, thus saving the time...

Edge Products EAS 12V Power Supply Starter Kit -DESIGNED FOR USE WITH EDGE PRODUCTS INSIGHT CS2 & CTS

The Edge Products 98615 EAS 12V Power Supply Starter Kit allows the Insight CS2 and CTS2 to work on vehicles that don't have an OBDII port! By connecting to a key-switch power and ground source, an Insight becomes a digital gauge display for...

Edge Products EAS Data Logging Kit -DESIGNED FOR USE WITH EDGE PRODUCTS INSIGHT CS2/CTS2/CTS3

The Edge Products 98618 EAS Data Logging Kit is the ultimate component kit for maximizing the use of your Edge Insight. This kits gives users the ability to monitor EGTs in two different locations, two 0-100 PSIg boost sensors, and two -40F to 300F...

BD-Power 1081160 Cool Down Timer 2

The BD-Power 1081160 Cool Down Timer 2 eliminates the problems of shutting your engine down after a heavy haul when the exhaust gas temperature (EGT) is above normal. This can result in turbo bearing damage, but now you can protect your turbo with BDs...

Edge Products EAS Power Switch w/ Starter Kit -FOR USE WITH EDGE CTS2 & CTS3 MONITORS

The Edge Products 98609 EAS Power Switch is an excellent upgrade for anyone that has or is planning to get an Edge Products CTS. This power switch wiring harness gives you the ability to install accessories such as lights or an air compressor and engage...

Edge Products EAS Control Kit -DESIGNED FOR USE WITH EDGE PRODUCTS INSIGHT CTS2 & CTS3

The Edge Products 98616 EAS Control Kit allows you to monitor EGT's and adds the power switch to control multiple accessories with an on/off digital power switch. The EGT probe is a sensor that allows users to monitor critical Exhaust Gas Temperatures to...

Longhorn Fab OBDII Port Splitter UNIVERSAL - FOR OBDII VEHICLES

The Longhorn Fab 201043 OBDII Port Splitter is the perfect solution to the common problem of multiple aftermarket electronics requiring use of the OBDII port. Instead of unplugging your digital gauges to hook up the laptop, the OBDII Port Splitter...

Bully Dog Universal OBDII Block FOR USE WITH BULLY DOG GT & WATCHDOG TUNERS

The Bully Dog 40400-105 Universal OBDII Block fits the Bully Dog WatchDog and GT Tuner. Over time, the OBDII block can fail or become damaged. FEATURES:  Direct Replacement Fits Bully Dog WatchDog & GT...

Edge Products EAS Competition Kit -DESIGNED FOR USE WITH EDGE PRODUCTS INSIGHT CS2/CTS2/CTS3

The Edge Products 98617 EAS Competition Kit is the perfect option for those enthusiasts that want to maximize the use of their Edge Insight. The EAS Competition Kit gives you the ability to monitor EGTs and add an additional 0-100 PSIg boost and...

Edge Products EAS Replacement EGT Lead -FOR USE WITH EDGE PRODUCTS 98620

The Edge Products 98920 EAS Replacement EGT Lead is a replacement for the original lead that comes with the Edge Products 98620.   Features:  15" Lead Replacement For 98620  Prop 65 WARNING: Cancer & Reproductive Harm -...