Blessed Performance has the solution you need to see the true boost pressure your 6.0L Powerstroke is producing with the ITS Diesel 6.0 Powerstroke 100PSI MAP Sensor. From that factory the original MAP sensor on the 6.0 can only read 2bar (approximately 29psi) above atmospheric pressure. Designed to be a plug and play solution to read up to 100psi of boost allowing you to see an accurate boost reading on monitors and data-log without separate boost gauges. This MAP sensor bolts in the factory location, connects to the factory map sensor hose and plugs into the factory harness with zero splicing or other modifications needed. Install the sensor and have your tuner rescale the MAP.
HIGHLIGHTS:
- Ability to see up to 85 psi of boost on your Edge/SCT
- Plug and Play Wire Harness
- Made in America
- Installs in factory location in under 5 minutes
IF YOU OWN A 2003 MODEL YEAR WITH THE PIPE THREAD EBP SENSOR YOU WILL NEED TO REMOVE THAT EBP SENSOR AND THE BRACKET FROM THE EBP SENSOR TUBE IN ORDER TO INSTALL THE 6.4 EBP SENSOR YOU NEED THE JIC FITTING OR AN FITTING THAT IS ON THE METAL EBP TUBE. FORD UPDATED TO A JIC FITING IN THE LATER YEARS AND ESSENTIALLY ZIP TIED THE TUBE TO THE FICM BRACKET. YOU WILL NEED TO DO THIS SMALL MODIFICATION FOR THE 6.4 EBP SENSOR TO WORK ON YOUR 03 MODEL YEAR TRUCK. WE WILL MAKE A YOUTUBE VIDEO OF THIS IN THE NEAR FUTURE AND POST IT AND THE LINK HERE.