Product Description
Shop with Blessed Performance for the Driven Diesel SD High Volume Fuel Delivery Kit (DUAL BOSCH : SUMP) for 1999-2007 Ford 7.3/6.0L Powerstroke diesel pickups.
Created to support performance street builds, while still maintaining "Near OE" reliability. Driven Diesel accomplished this by using two of the Bosch OE fuel pumps from a 7.3L Super Duty. These pumps were specifically designed to pump diesel fuel and have proven time and again that they are capable of running in excess of 100,000 miles without fail. By running two of these pumps in a "side by side" a parallel configuration, they have doubled the volume of fuel being delivered to the engine, allowing them to support larger injector upgrades without sacrificing reliability.
Dual pumps also provides a level of redundancy for "high performance" trucks that are also asked to do regular duty as the family tow rig or daily driver. Coupled with Driven Diesel's newly revised Compact Fuel Pump & Filter Mount and the fuel tank sump of your choice, this kit provides everything you need to feed your hungry 7.3L or 6.0L Powerstroke truck.
HIGHLIGHTS
• SUPPORTS UP TO 250cc Injectors (1999-2007 7.3L & 6.0L)
• INCLUDES (2) BRAND NEW Bosch 7.3L Electric Fuel Pumps
• NEW DRIVEN DIESEL BILLET High Flow Pre & Post Pump Fuel Filter Heads
• NEW DRIVEN DIESEL Mounting Bracket Assembly (Improved Fit and Flexibility)
• Rubber Insulated Clamps to Reduce Pump Noise / Vibration
• High Quality Baldwin Fuel Filters
• DRIVEN DIESEL 40A Fuel Pump Wiring Harness
• ALL Necessary Hose / Fittings / Clamps / Hardware
• Full Color Installation Instructions
• SUMP NOT INCLUDED!
Denotes Items that are 100% MADE IN THE USA!
** WIRING NOTE : This kit has a single wiring harness, and instructions that will run BOTH fuel pumps 100% of the time. This is NOT the only way to do it, running dual pumps provides a flexibility that you don't get with a single pump setup, you simply need to purchase a second fuel pump harness to open up the possibilities. With two separate harnesses, you could have complete, independent control of your fuel pumps from inside the cab. With a pair of toggle switches (not included), you could run the truck on a single fuel pump under "normal driving" conditions, easily alternate back and forth between the pumps so you are not always running the same one, and easily enable the second pump only when you are needing the extra volume.
This kit was designed to mount INSIDE the frame rail, forward of the stock fuel tank. The fully assembled pump bracket requires about 13-15" of straight frame space to allow for the inlet and outlet hoses to route cleanly. If you have a short wheelbase truck or you have other equipment already mounted in the area forward of the fuel tank, you will need to plan on installing the kit on the OUTSIDE of the frame rail. In these cases, care will need to be taken with regard to the parking brake cable and fuel line routing. All of the pictures in the instructions show a system plumbed for INSIDE the frame mounting, but they have tested and confirmed that it will fit outside the frame as well.
* FUEL TANK SUMP NOTE: Driven Diesel no longer includes the billet sump with the sump version of the fuel delivery kits. They have sumps available as additional options, but this change allows customers to use any sump from any vendor, even one that might already be installed, provided it will work with the industry standard fittings we have included in our kit (1/2" NPT or #8 O-Ring Boss). Feel free to choose from the sumps they are offering as options, or to source your sump from any supplier of your choice. Please note that sumps ordered from Strictly Diesel may not ship with the fuel delivery kit, and may arrive in a separate box.
HIGHLIGHTS
• SUPPORTS UP TO 250cc Injectors (1999-2007 7.3L & 6.0L)
• INCLUDES (2) BRAND NEW Bosch 7.3L Electric Fuel Pumps
• NEW DRIVEN DIESEL BILLET High Flow Pre & Post Pump Fuel Filter Heads
• NEW DRIVEN DIESEL Mounting Bracket Assembly (Improved Fit and Flexibility)
• Rubber Insulated Clamps to Reduce Pump Noise / Vibration
• High Quality Baldwin Fuel Filters
• DRIVEN DIESEL 40A Fuel Pump Wiring Harness
• ALL Necessary Hose / Fittings / Clamps / Hardware
• Full Color Installation Instructions
• SUMP NOT INCLUDED!
Denotes Items that are 100% MADE IN THE USA!** WIRING NOTE : This kit has a single wiring harness, and instructions that will run BOTH fuel pumps 100% of the time. This is NOT the only way to do it, running dual pumps provides a flexibility that you don't get with a single pump setup, you simply need to purchase a second fuel pump harness to open up the possibilities. With two separate harnesses, you could have complete, independent control of your fuel pumps from inside the cab. With a pair of toggle switches (not included), you could run the truck on a single fuel pump under "normal driving" conditions, easily alternate back and forth between the pumps so you are not always running the same one, and easily enable the second pump only when you are needing the extra volume.
This kit was designed to mount INSIDE the frame rail, forward of the stock fuel tank. The fully assembled pump bracket requires about 13-15" of straight frame space to allow for the inlet and outlet hoses to route cleanly. If you have a short wheelbase truck or you have other equipment already mounted in the area forward of the fuel tank, you will need to plan on installing the kit on the OUTSIDE of the frame rail. In these cases, care will need to be taken with regard to the parking brake cable and fuel line routing. All of the pictures in the instructions show a system plumbed for INSIDE the frame mounting, but they have tested and confirmed that it will fit outside the frame as well.
* 99-03 7.3L NOTE : This kit was designed to work with the very popular "7.3L Fuel Bowl Delete" Regulated Return Kit. As such, it does NOT include the proper fittings to supply fuel to the factory fuel filter bowl. We supply standard #6AN fittings for making the connection to the fuel inlet at the engine which will mate up perfectly with the 7.3L Fuel Bowl Delete Regulated Return Kit.
* 03-07 6.0L NOTE : Although this kit was designed to work with the new "6.0L Fuel Bowl Delete" Regulated Return Kit, it is also possible to use it with the standard 6.0L Regulated Return Kit by connecting the outlet hose from this kit to the stock metal fuel supply line that runs from from the outlet of the stock fuel pump to the engine, and removing the stock fuel filter cartridge and standpipe assembly from the secondary fuel filter bowl. See the instructions for more detailed information.
* 03-07 6.0L NOTE : Although this kit was designed to work with the new "6.0L Fuel Bowl Delete" Regulated Return Kit, it is also possible to use it with the standard 6.0L Regulated Return Kit by connecting the outlet hose from this kit to the stock metal fuel supply line that runs from from the outlet of the stock fuel pump to the engine, and removing the stock fuel filter cartridge and standpipe assembly from the secondary fuel filter bowl. See the instructions for more detailed information.
STOCK NOTICE : Due to the large number of options within this "High Volume Fuel Delivery System" line (Fuelab or Dual Bosch, Pickup or Sump), We do not have these kits pre-assembled and ready to ship. Each kit will be BUILT-TO-ORDER, once the order has been received. PLEASE ALLOW 3-5 BUSINESS DAYS FOR ORDER PROCESSING, KIT ASSEMBLY AND SHIPPING. If you have a need that is more urgent, please call our office 1-800-577-2698 and discuss it with a member of our staff to confirm that we can meet your deadline before ordering. Thank You for your patience and understanding!
