Driven Diesel Fuel Pressure Sensor Adapter for 2003 to 2007 Ford 6.0L Powerstroke

Shop with Blessed Performance for the Driven Diesel Fuel Pressure Sensor Adapter for your 2003-2007 Ford 6.0L Powerstroke. This kit allows the connection of a remote electrical Fuel Pressure Sending Unit (like the one provided with our AutoMeter Electric Fuel Pressure Gauges) or a remote under-hood mechanical fuel pressure gauge, to the Ford 6.0L Powerstroke Diesel. The provided adapter fitting installs in place of the plug in the fuel filter bowl and the hose allows the sending unit to be located off the engine (away from heat and vibration). The sending unit can also be located lower than the filter bowl (allowing any air bubbles to migrate back up to the filter so they don't affect the pressure reading). We typically route the hose and sending unit behind the airbox and battery tray near the drivers side of the engine compartment.

HIGHLIGHTS:
• Filter Bowl Adapter Fitting
• 30" Pre-Assembled S.S. Braided Teflon Hose *
• BLACK Protective Sleeve Over Hose
• 1/8" Female NPT Gauge / Sending Unit Port
• Schrader Valve to Bleed Air or Connect Mechanical Gauge
• 45° Hose End for Better Clearance

* - We make every attempt possible to source and use as much U.S. made product/material as we possibly can...as long as doing so doesn't sacrifice the quality of the final product. Items marked with a * above have been modified or assembled by U.S. workers in a U.S. shop. Items marked with ** above were ENTIRELY produced from U.S. material, in U.S. shops, by U.S. workers. We can't always control where every component of one of our products comes from, but you count on us to keep looking for ways to increase the % of American Made parts and materials in the products that we produce.