Product Description
Shop with Blessed Performance for the SPE WHIPPLE 5 BOLT 10 RIB (4TH AND 5TH GEN) BLOWER PULLEYS.
The SPE pulleys offer an unmatched amount of grip. If you want to push the limits of your whipple blower look no further. They are available in 6 or 10 rib.
The patent pending CNC Convex Knurling process (CKP) on the SPE pulleys offers a perfect balance between belt grip and wear.
The machining process allows the rib surface to offer varying grip under different belt loads. Under minimal boost (light Throttle) the belt tension is lower at the pulley face. The process offers a low load area for the belt to have normal factory like contact on the rib face allowing the belt to wear less over time. When load is applied it is wedged down into the Convex knurling the grip becomes more aggressive to the belt the higher the load (Boost demand) becomes. This keeps the belt on a perfect grip/wear threshold. Unlike Laser surface etching found on our competitors pulleys our process doesn't degrade or wear off. Since our pulleys don't wear they are more consistent giving the customer better track times and dyno numbers. Although SPE's CNC Convex Knurling Process is costly to produce the goal is the provide customers the best quality product at the best price possible.
SPE has many options to put together the perfect setup for your car. When deciding pulley sizing .100 smaller is equal to a 1 PSI increase depending on altitude. Not sure what you need? Contact us today 1-800-577-2698
